EZ-PUMPTM TOTAL INFLATION SYSTEM
Designed for simplicity and ease of use in cold weather conditions, but works perfectly in all temperatures. Our new EZ-pumpTM total inflation system with integrated silicone stopper valves allows easy one-shot inflation of the entire airframe of the kite. Practicality and simplicity that you can trust.
All-TERRAIN GEOMETRY
The twists and turns of all-terrain kiting and wave riding demand a fast and responsive kite. The Bularoo is a mid-aspect ratio design, delivering matchless turning speed with precision steering and incredibly low bar pressure. These characteristics combine to make the Bularoo the first inflatable kite that is perfect for all day rides and extended back country exploration.
LE IMPACT AND ROLLOVER PROTECTORS
The Bularoo's leading edge is reinforced with strategically placed rollover and impact protection. These soft but strong cushions enable the LE to grip the snow and ground for easy re-launching and minimize contact with the ground during impacts.
PROFILE SHAPER BATTENS
Fiberglass Reinforced Profile Shapers reduce upper canopy deformation at low angles of attack. Profile Shapers ensure that your Bularoo is the smoothest flying kite, even at the absolute limits of depower. A clear and tough outer casing on each batten ensures that should you ever need to replace one it is a ten second job, never a trip to the repair shop.
CANOPY FRAMING TECHNOLOGY
Crashing your kite is a fact of life. The Bularoo is the only all-terrain kite designed with Canopy Framing Technology, the ultimate reinforcement system. The entire perimeter of each canopy panel on the Bularoo is supported with a continuous reinforcement zone, isolating the canopy from impact loads and delivering protection that you can believe in.
SUPPORTED LEADING EDGE DESIGN
Unlike open cell foil kites, our advanced SLE design is immune to front tucking in wind shift. With a lightweight inflated structure and huge depower on tap there is no more stable kite available for adverse wind conditions.
WINGTIP PANNEL BATTENS
Strategically placed wingtip battens increase turning response, improve aerodynamics by controlling air flow over the control surfaces and eliminate canopy flutter.
MAXIMIZED LE PROFILE
A thicker LE profile and deeper chord curvature endows the Bularoo with exceptional low wind stability and ultra-smooth flying characteristics. Whether you are landboarding along a tree lined field, traversing the most exposed snow drifted ridges, or surfing a wind shadowed point break, you can rely on the Bularoo to be the most stable All-terrain kite that you have ever flown.
SOLID AIRFRAME CONSTRUCTION
There is no better way to connect the leading edge to the struts. Our construction gives the stiffest and lightest structure available, yielding a kite with exceptional performance and easy handling for riders of all abilities.
TEIJIN RIP-STOP CANOPY
If you want to cut corners, you can buy cheaper fabric, but you certainly can't use anything better. We only use Teijen Rip-Stop for our canopy material, as there's no better Rip-Stop cloth available and we only use the best.
DACRON WING TIP PANELS
Multi-layer Dacron wingtip panels distribute turning forces for unmatched responsiveness and enable self launching without risk of damage.
WOVEN SPECTRA SERVICEABLE PULLEY LINES
4mm braided abrasion resistant pulley lines, easily replaceable for minimum down time. Pulley lines include depower stopper knots which limit bridle travel to enhance stability in all wind conditions.
RONSTAN HIGH LOAD PULLEY
Low friction, all temperature, high load pulleys help deliver maximum depower and precision handling in all conditions with reduced bridle wear.
LOAD FLEX LE SEAM
Unique three layer webbing taped LE seam guarantees the strongest LE on any inflatable kite, there is simply no stronger seam construction.
TERRAIN TOUGH CONSTRUCTION
Our unique Canopy Framing Technology, LE Load Flex seam, fully taped canopy and Solid Airframe Construction come together to deliver the most proven and trusted kite construction package in the industry.
Ever since the release of the original Waroo SLE, snowkiters and landboarders have been demanding that the R&D team create a terrain specific version that delivers all the performance of the Waroo, with all the additional practicality that use in cold climates dictates.
For the 08 season the Bularoo has been updated with new internal EZ-PumpTM valves, improved bladder shaping and wider strut junctions and a new Dimensional Polyant Dacron cloth for the leading edge.
Much more than just a Waroo with added protection and cold weather features, the 08 Bularoo draws heavily on the R&D teams' SLE design expertise. The Bularoo has been created specifically for the challenging terrain and wind conditions that snowkiters and landboarders revel in. Its All-terrain credentials, depower and stability also make it highly suited to advance wave riding.
New product features on the Bularoo enable far easier inflation, enhance flight stability, increase turning speed and deliver the most durable inflatable kite ever built for the snow and land.
Our new EZ-pumpTM total inflation system delivers rapid inflation even with gloved hands. With only one pump point to inflate, you waste less time setting up and gain more time riding. The air-line inflation system connects every strut directly to the LE bladder by a series of short one-way silicon valves. This design adds minimal weight, maximum convenience and gives total flexibility in setting inflation pressure across the kite.
Unique All-Terrain canopy and airframe geometry make the Bularoo the most stable high performance SLE ever designed for All-terrain kiteboarding. A deeper canopy profile handles gusty conditions effortlessly; delivering smoothness in flight that has to be experienced to be believed. When other kites are rocking and surging in the gusts, the Bularoo remains totally stable and reliable. From mountains to mountainous waves, no other kite comes close.
Canopy Framing Technology across the entire kite protects it from damage during big impacts. Placed between the airframe, the canopy and along the trailing edge, CFT delivers unmatched durability and protects your investment in equipment for seasons to come.
If you demand the best performance, the highest standards of construction and the utmost All-terrain reliability, then there really is only one choice.
EZ-PUMPTM TOTAL INFLATION SYSTEM: The fastest inflation system on the market. Solid, dependable and tested down to -26 degrees.
MAXIMIZED LE PROFILE: Increased LE thickness for improved down-the-line riding.
ADVANCED SLE DESIGN: Maximum depower and maximum safety for use in all kiting conditions and locations.
FLEXABLE WRAPPED FIBERGLASS PROFILE SHAPER BATTENS: Improved aerodynamic efficiency for greater upwind and improved stability.
REDUCED ASPECT RATIO: Faster turning and easier flying.
LOAD DISTRIBUTING CANOPY FRAMING TECHNOLOGY REINFORCEMENT: The best impact resistance in the industry.
TEIJIN RIP-STOP POLYESTER CANOPY: Highest specification cloth for maximum performance and durability.
DACRON WING TIP PANNELS: Fast load distribution for enhanced turning speed. Trouble-free self launching on any surface.
ALL GLUED AND STICHED SEAMS: The toughest construction going, precision and strength in perfect harmony.
TRAILING EDGE PANEL BATTENS: Flutter-free turning.
WOVEN SPECTRA PULLEY LINES: High tenacity replicable bridle inserts ensure minimum down time and maximum performance.
RONSTAN HIGH LOAD PULLEYS: Low friction, low maintenance pulleys for smooth depowering and effortless kite control.
WEBBING TAPED TRIPLE STICHED LE SEAM: The toughest leading seam we have ever created, designed to be abused on the snow, in the waves and on land.
BRAIDED NON-STRECH FRONT AND REAR BRIDLE LINES: Guaranteed to fly perfect straight out of the bag and designed to last.
SECONDARY PULLEY SUPPORT AND SAFTEY: Additional safety back-up for high fliers.
ALL-TERRAIN TOUGH CONSTRUCTION: The new standard in kite construction, CFT, Solid airframe construction and fully taped and glued seams.
The Best Bularoo is designed to work in all conditions: from mountains, to snow plains, to your back yard. It is even at home in overhead line-ups.
With performance that you can really trust and stability that has to be experienced to be believed, the Bularoo is the perfect kite for All-terrain kiteboarding activities.
Our construction techniques and material choices are the envy of the industry. No other manufacturer can deliver this quality and performance at any price.
If you are serious about All-terrain kiting, demand the best upwind, fastest turning response, unreal hangtime and jumping then there is no other kite designed to perform at the same level as the Best Bularoo.
Wind Range
Size (sqm)
Range (knots)
Recommended Bar Size
7 !
20-35
45cm bar
10 !
15-32
45 to 55cm bar
13
12-24
55cm bar
16 *
8-20
55cm bar
*Designed for heavy-weight riders over 90 kgs as an all purpose kite and for lighter riders for use with larger boards in light wind conditions.
! Best Kiteboarding does not recommend that any rider goes kiteboarding in winds above 35 knots. Always ride safe and within your limits
The Best Kiteboarding R&D program takes place all over the world. Our two main research and development facilities are in Western Australia and Brazil. Product development takes place in Australia for 6 months of the year, the team then moves onto Brazil for further testing, while some members travel the Globe for the rest of the year fine tuning product for the upcoming season.
Direct customer feedback plays an important role in the development of every Best Kiteboarding product, that’s why you are welcome anytime at our Brazil R&D facility to come and try the latest products under development. While you are there, there is a good chance you will get to meet many of the team who are responsible for your favorite products every season. Take the time to stop them and chat, we really do value your feedback.
Alongside our demanding testing schedule are numerous visits to each one of our production facilities. Kite production is closely overseen by our designer Peter Stiewe, with each step/change being verified on location to make sure that every kite produced is exactly as it was intended. Numerous conferences take place with our materials suppliers every season, as new cloths are developed, tested and readied for possible production. Our particularly close relationship with Cubic Tech Corp has enabled us to develop a range of advanced technical fabrics that have allowed our HP and older Pro range of kites to deliver unmatched technical performance.
When near-final versions of kites have been made, small batches are shipped out to testers across the USA, Europe, South Africa and Australia. We put all of our kites into the hands of the toughest and most demanding riders on the planet, not just competitive riders, but riders of all ages and all levels who each have a completely different set of requirements. Only when each kite has been refined and tuned to perfection do they make their way into production and onto the shelves of our dealers worldwide.
For every Best Kiteboarding kite we demand the very highest quality fabrics and components, alongside the most stringent levels of production control and quality assurance. As riders we would not settle for anything less, neither should you.
BestKiteboarding занимается исследованиями и разработкой новых моделей в разных местах, разбросанных по всему миру. Две основные базы находятся в Австралии и Бразилии – там, где ветер дует постоянно месяцами. Первичная разработка в течении 6 месяцев ведется на базе в Австралии, а затем вся команда разработчиков перемещается в Бразилию для тестов и окончательной доводки моделей перед началом нового сезона.
Как известно, нам всегда важно мнение наших клиентов, а особенно стадии проектирования. Поэтому, если Вы вдруг окажетесь рядом с нашей базой на севере Бразилии, милости просим на тесты самого новейшего секретного оборудования линейки следующего года! Почти наверняка Вы сможете познакомиться с большей частью нашей команды, которая создает практически все продукты, представляемые под маркой BEST kiteboarding каждый сезон.
В то время, как происходит конструирование и тестирование новых моделей, наши производственники тоже не сидят без дела.
Каждый этап производственного цикла на наших фабриках в Азии внимательно изучается и оптимизируется разработчиком Петером Стивом (Peter Stiewe), что позволять добиваться полного соответствия между задуманным и исполненным.
Проводятся многочисленные встречи и конференции с поставщиками материалов, чтобы выявить, протестировать и отобрать для серийного производства только самое лучшее.
Наше тесное сотрудничество с Cuben Fiber Corp’ дает возможность разрабатывать небольшие партии нестандартных материалов Cuben Fiber с особыми свойствами, которые используются в моделях Waroo Pro.
Когда мы отшиваем пред-финальные версии кайтов, мы отправляем небольшие партии в Европу и Штаты, отдавая их в руки самых различных людей, не только профессионалам, принимающим участие в соревнованиях, но также и тем, кто только учиться кататься. Мы собираем отзывы и вносим последние штрихи в конструкцию. И только после того, как кайты получат окончательную доводку с учетом мнений наших тестеров, мы запускаем новую линейку в производство.
BEST KITEBOARDING CUSTOMER SUPPORT AND WARRANTY 30-Day Performance Guarantee
Best Kiteboarding warranties its products to the original purchaser in the form of a 30-Day performance guarantee. If you are not satisfied with any of our products, you may return the products for a full refund or exchange within 30 days of documented delivery of the product as certified by the shipper. This warranty is subject to the following limitations:
This Warranty does not cover products used in rental or teaching operations.
This warranty is void if any unauthorized repair, change or modification has been made to any part of the equipment.
This warranty is void if, in Best Kiteboarding's sole discretion, Best Kiteboarding feels that the purchaser is taking advantage of this policy.
This warranty excludes Used/Pre-Owned gear sold on bestkiteboarding.com.
Items not purchased directly from Best Kiteboarding (via bestkiteboarding.com or our toll-free telephone number), are warranted through the original place of purchase only
30 дневная ознакомительная гарантия
Bestkiteboarding предоставляет каждому своему покупателю своеобразную ознакомительную гарантию на 30 дней. В случае, если Вы не довольны каким либо купленным у нас продуктом, Вы можете заменить его или вернуть стоимость в течении 30 дней с даты, документально подтвержденной службой доставки.
Ознакомительная гарантия работает в согласии со следующими положениями и ограничениями:
Гарантия не распространяется на оборудование, использованное для обучения или сдававшееся напрокат.
Гарантия теряет силу в случае неавторизованного ремонта, замене или изменении любой части оборудования.
Гарантия теряет силу если Bestkiteboarding имеет подозрения, что покупатель пытается извлечь выгоду из условий гарантийного соглашения.
Гарантия не относиться к оборудованию, бывшему в употреблении и проданном через систему Used/Pre-Owned gear на bestkiteboarding.com
Нажмите здесь чтобы ознакомиться с нашими требованиями при возврате товара
Нажмите здесь чтобы поговорить с нами
Нажмите здесь чтобы отправить нам email
